1. Introduction

This guide details how to use the "upload calibration factors" function in the edit sensors screen within ARGUS.

2. Uploading Factors

To do this you will need to create a .CSV file using excel, the name of the file does not matter.

First column will have "SerialNumber" as the title. The following rows will be used to identify which sensor the calibration factors are related to by using the serial number which is defined for the sensors within ARGUS.

The other columns will need to be named after the variable you are using in your formula. The equal sign and the carriage returns will be added automatically by ARGUS when the file is uploaded.

A fictitious example of the file format is attached at the bottom of this article.

If you need any part of this guide expanded on please submit a ticket through the support site, referencing this knowledgebase.

If you have any further queries, please submit a ticket on the support site or call Soil Instruments on +44 01825 765044 for advice.

Checked MO'R v1.0 20/05/15