Knowledgebase
* Instrument Calibration Frequency Guidelines
Posted by on 11 May 2015 02:59 PM

Calibration frequency of Instrumentation is generally dictated by contract or regulation requirements. Additional guidelines can be offered by the manufacturer if needed.

For Instruments that are not installed in fixed positions ie portable, or are not required for continuous monitoring, the manufacturer would advise that where possible annual calibration is recommended. Regular calibration of portable instrumentation is essential as the instruments are more exposed to various influences.

Manufacturer guidelines are intended to be guidelines only, many factors might influence the calibration frequency decision. Some of these factors might be usage, system performance indicators and environmental effects. The users should conclude the calibration requirement based on all factors presented.

Instrumentation that is installed for long term monitoring of structures should be calibrated pre installation. Following installation further calibration periods should be decided based on monitoring requirements and system performance. Commonly due to instrumentation being installed in an environment where it remains untouched calibration periods might be further apart.

Typically instruments are not recalibrated during long term monitoring of a structure unless results have raised concern and there is call for the instruments to be verified.

 

Checked 11/05/15 MO'R

(1 votes)
This article was helpful
This article was not helpful

Comments (0)
Post a new comment
 
 
Full Name:
Email:
Comments:
CAPTCHA Verification 
 
Please enter the text you see in the image into the textbox below. This is required to prevent automated registrations and form submissions.

Help Desk Software by Kayako Resolve